Exhaust stand is designed to remove fumes, solvent vapors, oil mist, and is equipped with soundproof walls. The special case of the exhaust stand consists of galvanized metal panels interconnected by bolts. Side panels and partitions are load-bearing. The modular design allows quick installation by workers who are not highly qualified.
| Model | Air being removed, m³/h | Total pressure, Pa | Power, kWt | Filtering surface, m² | Height z propellerom, mm | A, mm | B, mm | H, mm |
|---|---|---|---|---|---|---|---|---|
| ES 2 | 2000 | 1000 | 1,5 | 1,6 | 2738 | 1,165 | 1,609 | 2,200 |
| Model | ES 2 |
|---|---|
| Air being removed, m³/h | 2000 |
| Total pressure, Pa | 1000 |
| Power, kWt | 1,5 |
| Filtering surface, m² | 1,6 |
| Height z propellerom, mm | 2738 |
| A, mm | 1,165 |
| B, mm | 1,609 |
| H, mm | 2,200 |
| Model | Air being removed, m³/h | Total pressure, Pa | Power, kWt | Filtering surface, m² | Height z propellerom, mm | A, mm | B, mm | H, mm |
|---|---|---|---|---|---|---|---|---|
| ES 2 | 2000 | 1000 | 1,5 | 1,6 | 2738 | 1,165 | 1,609 | 2,200 |
| Model | ES 2 |
|---|---|
| Air being removed, m³/h | 2000 |
| Total pressure, Pa | 1000 |
| Power, kWt | 1,5 |
| Filtering surface, m² | 1,6 |
| Height z propellerom, mm | 2738 |
| A, mm | 1,165 |
| B, mm | 1,609 |
| H, mm | 2,200 |
It has a surface where it is possible to carry out cleaning, tinting and also for testing gasoline powered tools. Equipped with a bathtub for collecting liquids.
It has 2 stages of filtration:
– vertical metal labyrinth;
– horizontal strainer.
Equipped with a powerful fan
The exhaust stand is designed to remove fumes, solvent vapors, oil mist and is equipped with soundproof walls. The special housing of the spray booth consists of galvanized metal panels interconnected by bolts. Side panels and partitions are load-bearing. The modular design allows quick installation by workers who are not highly qualified.
Air filtration system:
The filtering elements of the spray booth are high-tech inertial separator filters and fine filters. Using a fan, a vacuum is created that sucks air through the filters, so that polluted air does not spread in the room. The first stage of cleaning – a vertical metal filter, a labyrinth traps a large fraction and oil mist;
while the second stage is fiberglass filters that perform fine air purification. The entire filtration system contributes to the deposition of particulate matter, suspensions, aerosols, oil vapors and gasolines.
Basic equipment:
• Stand body
• set of filters
• Fan of the RM-AS series performed by ATEX 3 GD
• Remote Control
The speed of the air flow of the chamber is 0.4 m / s, which provides sufficient traction to catch harmful fog. Properly organized air flow in the working area allows the employee to be continuously in the room, which increases the efficiency of his work.
Reviews
There are no reviews yet.