Aspiration bench EST-1500W

The EST model sanding table is used to suck in and remove dust generated during manual or machine sanding by connecting the table to a centralized aspiration system that already exists in the company or that integrates sanding tables.

A grinding table is a ready-made workstation. One or more grinding tables are connected to a centralized filtering system via a duct system. Their startup, operation and shutdown are controlled by the operation of the centralized filtering plant, the control panel of the plant and the dampers in the air duct system. The dust is drawn through the openings in the work surface by the centralized aspiration fan, transported to the centralized filtering plant and filtered on the filters of the centralized filtering plant.
Some types of EST sanding tables have active side and rear surfaces through which air and dust are also sucked in, which increases the efficiency of the table and is an advantage when processing large-sized products (e.g. doors, table components, cabinets, etc.).
The main task of the EST sanding table is to maximize the capture of waste particles generated during material processing.

Certificates and declarations
The EST grinding table is manufactured in accordance with the standards established by the Quality Management System of Aton Service LLC in accordance with the requirements of ISO 9001:2015. It meets the requirements of DSTU EN 60204-l:2015, DSTU EN 61000-6-2:2015, DSTU EN 61000-6-4:2016.
CE declaration
The EST model grinding tables are subject to the CE Declaration of Conformity under the sole responsibility of the manufacturer.
Aton Service, declares that the above object of the declaration – the grinding table – complies with the directives and standards of the European Union.

IMPORTANT TO REMEMBER!
The grinding table operates exclusively in atmospheric air and is not designed to purify the air from other gases (CO, CO2), except as provided by the manufacturer of the centralized filtering unit with appropriate filters.
DO NOT!
– Use grinding tables to filter air containing: paint, large and long fractions of material, rags, metal foreign bodies or any other inclusions that may damage the table itself, the fan, the filters in the centralized filtering unit and the unit itself.
– Carry out maintenance, scheduled cleaning of the table or repairs when the table is not disconnected from the centralized aspiration system.
– Perform any interventions on the grinding table while it is in operation.

Translated with DeepL.com (free version)